  |
- Angle Post (Standard Duty): 1-1/2" x 1-1/2" x 14 gauge
cold rolled steel corner post uprights. Perfect for standard load situations.
- Angle Post (Heavy Duty): Shall be 1-7/8" x 1-7/8" x 14
gaugecold rolled steel uprights. The choice when heavy dutyshelving
is required. Perfect for multilevel installations.
- T-Post (Standard/Heavy Duty): 3-3/4" x 1-7/8" x 14 gauge
cold rolled steel intermediate uprights. This post is used for both
standard duty and heavy duty add-on units.
- Single Rivet Shelf Beam (Standard Duty): This low profile standard
intermediate level shelf beam is perfect when maximum clear opening
is required between shelf levels.
- Single Rivet Shelf Beam (Heavy Duty): A heavy duty version of our
low profile intermediate shelf beam allowing maximum clear opening between
shelf levels.
- Double Rivet Angle Beam (Standard Duty): This shelf beam is essential
for stability of standard units; therefore, is used on all four sides
at the top and bottom levels. Can also beused front and back or on all
four sides of intermediate levels to increase unit stability and load
capacity.
- Double Rivet Angle Beam (Heavy Duty): An upgrade to our standard duty
double rivet angle beams, our heavy duty double rivet angle beams provide
additional unit rigidity and even higher shelf capacity.
- Double Rivet Channel Beam: Maximized left-to-right shelf capacity
is achieved using our double rivet channel beams in lieu of double rivet
angle beams. These beams cannot be used at the bottom level.
- Center Support: Used to provide additional shelf support front-to-back
by bolting between double rivet beams at prepunched locations. Ideal
for wider spans.
- Double Rivet Z-Beam (Standard Duty): For 12” thru 60” beams.
Used in place of double rivet angle beams to add 1” additional
clearance between shelf levels. Allows particle board decking to sit
flush with beam. Protects decking edges. When used at bottom level of
single rivet units, shelf clearance is increased by 1” at lower
level.
- Double Rivet Z-Beam (Heavy Duty): For 69” and 72” beams.
Used in place of double rivet angle beams to add 1” additional
clearance between shelf levels. Allows particle board decking to sit
flush with beam. Protects decking edges.
- Center Support for Z-Beam: Used with Z-Beams for front to back decking
support.
|