Made in America
Hallowell is Green
Follow us on Twitter
Find us on Facebook
Hallowell Hi-Tech Shelving Systems

Hi-Tech shelving is strong and versatile enough to be useful in almost any situation.

H-Tech Shelving Systems Gallery:

Multi Level

Hallowell Shelving Systems
Hallowell Shelving Systems
Hallowell Shelving Systems

 

Deck Over

Hi-Tech - Deck Over
Hi-Tech - Deck Over
Hi-Tech - Deck Over

 

Components

Beaded Front Posts

True flush construction. Slotted on 1-1/2 centers for easy shelf adjustment. Splice multiple posts for additional height.

Angle Back Posts

Angles for single or end units. Slotted on 1-1/2 centers for easy shelf adjustment. Splice multiple posts for additional height.

T-Posts

Two back Posts welded together. For use when adjoining models are added to form a continuous row.

Post Slice Channels

A channel formed internal splice. Used to splice beaded front posts, back posts and T-posts for added height.

Back Sway Braces

(2x) 1" x 11 ga. steel strips with safety edges bolted together at center to form an X.

Side Sway Braces

(2x) 1" x 11 ga. steel strips with safety edges bolted together at center to form an X.

Box Beam Shelves

Medium-Duty, Heavy-Duty, or Extra-Heavy-Duty Roll formed & triple flanged. Top pierced to accept dividers.

Shelf Clip

One-piece zinc plated compression clip fits snugly against side of posts to hold shelves in place. Four required per shelf.

Back Panels,
24 & 16 Gauge

Two piece sections punched on 1 centers at vertical edges and center for mounting on back of posts and shelves.

Back Panel Clips

Formed to fit bottom flange of standard shelf and tabbed to pick up holes in center of back panel. Holds back panel to shelf and prevents panel bowing.

Base Strips

Shaped to fit directly between bottom shelf and floor. 2-15/16 high giving an overall base height of 3" including bottom of shelf.

Side Panels

Two piece panels are bolted to standard Beaded, Angle and T-Posts when solid sides are required.

Swinging Doors
(With Locks)

Attaches to beaded front posts & opens quietly 150. Chrome finished handle with built-in grooved key cylinder lock.

Universal Clip
To Mount Doors

Available in sets of 6. One set required to mount swinging doors to beaded front posts.

Label Holders

Pierced for attaching to front flange of shelves with top and bottom edges folded over to accommodate labels approximately 1 high.

Welded End Panels

Sections consisting of beaded front post, angle back post and one-piece side panel.
Factory welded.

Welded T-Panels

Sections consisting of beaded front post, back T-Post and one-piece side panel.
Factory welded.

Bin Fronts

Offset type with bead at top and triple flange at bottom to telescope over shelf flange.

Full & Partial Dividers

Flanged at top rear and bottom, or just bottom to form shelf dividers.

Nylon Buttons

Available in sets of 6. One set required to mount swinging doors to beaded front posts.

Cross Aisle Supports

For beaded posts.

Cross Aisle Support Brackets

Brackets for cross aisle supports.

Down Aisle Supports

For beaded posts and H-posts.

Down Aisle Support Brackets

For beaded posts and H-posts.

Combination Clips

Connection Strips

Row Ends

Connection Strips

Intermediate

Foot Plates

For beaded, angle and T-posts

Shim Plates

Medium/light-duty or heavy-duty

Foot Plate

Extra-heavy-duty for beaded, angle and T-posts

Learn more about our stock shelving here.