Rivetwell | Hallowell

A tradition of Quality since 1903

Made in America

Call Toll Free: 866-566-0500

HALLOWELL USA MADE FROM SIMPLE TO MULTI-LEVEL WE HAVE YOU COVERED

Rivetwell Shelving Systems

Rivetwell

Shelving Systems

Rivetwell

Boltless Steel Shelving

Rivetwell boltless shelving systems are easy and fast to assemble while still being a strong and sturdy unit. Hallowell shelving can be individually tailored to meet your customer's needs. Contact us to discuss your next shelving system.

See the components below for more information about the Rivetwell boltless shelving system

When designing a shelving layout, unit growth must be considered. To determine the overall dimension of a continuous row of shelving employing T-Posts or Angle Posts with tie plates refer to the table HERE.

Post Capacity Chart & Beam Load Table HERE

Rivetwell particle board and E-Z deck capacity ratings HERE

Single Level
Multi Level
High Bay
Deck Over
Components

Shelving

Galleries

Single Level

Multi Level

High Bay

Deck Over

Components

Angle Post

APS ( HEIGHT 3' TO 16' )

Punched for self-adjustment on 1-1/2" centers

T Post

TPS ( HEIGHT 3' THROUGH 16' )

Punched for self-adjustment on 1-1/2" centers

Double Rivet Angle Beam

Double Rivet Angle Beam

ABS ( Lengths 12" through 42" )

For left to right and front to back shelf support.

Double Rivet Channel Beam

CBH ( LENGTHS 48" THROUGH 96" )

For left to right shelf support. Provides for a higher capacity than heavy-duty rivet angle beams

Single Rivet Beam

Single Rivet Beam

SRB ( LENGTHS 12" THROUGH 48" ) SRBH ( LENGTHS 36" THROUGH 48" )

For use as left to right and front to back support.

Center Support

Center Support

CS ( LENGTHS 12" THROUGH 48" )

Bolts to double rivet angle or channel beams to add support to decking and stabilize beams. Supplied with nuts and bolts for fast assembly.

Double Row & Top Tie

DRTT ( LENGTHS 9.25" THROUGH 48.25" )

Use to space back-to-back units and to top-tie rows across aisle for added stability.

Wall Tie

WT09

Used to secure units to wall and provide space between wall and unit ( hardware not included to attached to wall )

Foot Plate

Foot Plate

FPR100

For use in anchoring angle and T posts to floor.

Post Splice

PS05

Used to extend post, attaches to outside of post. Order one per Angle Post, two per T-Post.

Tie Plate

Tie Plate

TP1

Used for structural integrity of T-Post and to join Angle Post units side by side to ensure proper row alignment.

Tire Rack Beam

TRB48 & TRB60

For left to right shelf support of tires. 9 degrees angle on supporting edge.

Hanger Bar

HB ZBH ( LENGTHS 36" THROUGH 60" )

For hanging items between double rivet beams. One or more may be used per level.

DOGS Deck Over Grating Support

DOGS ( LENGTHS 36" THROUGH 72" )

Provides secure support for grating when decking over entire installation.

Down Aisle Grating Support

DAGS ( LENGTHS 36" THROUGH 72" )

Attaches to unit front between rows to provide support for grating on 2-level Rivetwell installations

Beam Cleat

BC-L & BC-R

For hanging items between double rivet beams. One or more may be used per level.

Slotted Angle Cleat

Slotted Angle Cleat

SAC-L & SAC-R

For use where slotted angle pieces must be joined, such as special grating supports and top ties.

Double Rivet Z-Beam (standard or Heavy-Duty)

ZBH ( LENGTHS 48" THROUGH 72" )

For front to back and left to right. allows particle board decking to sit flush with top of beam.

Center Support for Z-Beams

ZCS ( LENGTHS 24" THROUGH 48" )

Use with Z-beams for additional decking support front to back.

Coat Rod Support Beam

ABH ( LENGTHS 18" THROUGH 48" )

For supporting Rivetwell coat rods

RCR Rivetwell Coat Rod

RCR ( LENGTHS 36" THROUGH 72" )

For use with coat rods and support beams

Wire Deck

Rivetwell wire decking is powdercoat gray

Particle Board Decking

Particle Board Decking

Smooth high-quality particleboard decking for Rivetwell units

EZ-Deck Steel Decking

EZ-Deck Steel Decking

EZ-deck steel decking fro Rivetwell shelving units